1. Appearance
The appearance of the inhaler should be smooth,with uniform color and clear,consistent patterns. It must not have defects such as exposed base,delamination,bubbling,peeling,cracking,or whiteningthat significantly affect the aesthetics.
2. Working Pressure
The inhaler should function normally within the pressure range of 0.2MPa to 0.3MPa after pressurere duction by the central oxygen supply system.
3. Flow Range and Basic Error
The flow range of the inhaler is 1L/min to 10L/min (or 15L/min)with a basic error of±4%of the maximum indicated value.
4. Safety Valve Discharge Pressure
When the output pressure of the inhaler rises to(0.170.05)MPa,the safety valve should automatically discharge.
5. Inhaler and Oxygen Pipeline Terminal
The inhaler connects to the oxygen pipeline terminal with a quick-connect and disconnect fitting.After connection,the joint should be well-sealed with no oxygen leakage.
6. Oxygen Output Connector
The oxygen output is connected to a delivery tube via a tapered connector.
7. Flow Tube
The flow adjustment valve of the inhaler should be easy to operate,with appropriate tightness,the float in the flow tube should move flexibly and smoothly,rotating the flow adjustment valve clockwise reduces the flow,and counterclockwise increases the flow with markings indicating the direction.When the flow adjustment valve is closed,there should be no oxygen output.
8. Sealing
When the inhaler is subjected to a working pressure of not less than 0.4MPa at the input,there should be no air leakage at any connection.
9. Humidification Bottle
The humidification bottle of the inhaler should be colorless and transparent or translucentwithmarkings for the highest and lowest liquid level indicators,and should be filed with an appropriateamount of water.lt should not crack under a pressure of (0.17+0.05)MPa.
